1 // Camera - A3400 - platform_camera.h
2
3 // This file contains the various settings values specific to the A3400 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 5
25
26 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
27 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
28
29 #define CAM_RAW_ROWPIX 4704 // Found @0xff932e60 a3400
30 #define CAM_RAW_ROWS 3504 // Found @0xff932e6c
31
32 #undef CAM_UNCACHED_BIT
33 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff8342d0 a3400
34
35 #define CAM_JPEG_WIDTH 4608
36 #define CAM_JPEG_HEIGHT 3456
37 #define CAM_ACTIVE_AREA_X1 12 // note: wide angle shots have a dark border (that area is excluded from vignetting correction)
38 #define CAM_ACTIVE_AREA_Y1 12
39 #define CAM_ACTIVE_AREA_X2 4668
40 #define CAM_ACTIVE_AREA_Y2 3490
41
42 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h
43
44 #undef CAM_SENSOR_BITS_PER_PIXEL
45 #define CAM_SENSOR_BITS_PER_PIXEL 12
46
47 #define cam_CFAPattern 0x01000201 // [Green Blue Red Green]
48
49 #define CAM_COLORMATRIX1 \
50 827547, 1000000, -290458, 1000000, -126086, 1000000, \
51 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
52 5181, 1000000, 48183, 1000000, 245014, 1000000
53
54 #define cam_CalibrationIlluminant1 1 // Daylight
55
56 #define CAM_ZEBRA_NOBUF 1
57
58 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
59
60 #define CAM_HAS_ND_FILTER 1
61
62 #define CAM_HAS_VIDEO_BUTTON 1
63 #undef CAM_VIDEO_CONTROL
64 #define CAM_VIDEO_QUALITY_ONLY 1
65 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
66 #define CAM_IS_VID_REC_WORKS 1
67
68 #define CAM_UNLOCK_ANALOG_AV_IN_REC 1 // define to enable analog video out in rec mode for cameras without native support
69
70 #define CAM_DATE_FOLDER_NAMING 0x400
71
72 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
73
74 #undef CAM_HAS_IRIS_DIAPHRAGM
75
76 #undef CAM_HAS_ERASE_BUTTON
77
78 #undef CAM_HAS_MANUAL_FOCUS
79
80 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
81
82 #undef CAM_USES_ASPECT_CORRECTION
83 #define CAM_USES_ASPECT_CORRECTION 1
84 #undef CAM_BITMAP_WIDTH
85 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
86
87 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
88 #define CAM_ALT_BUTTON_NAMES { "Playback", "Help", "Video" }
89 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_HELP, KEY_VIDEO }
90 #undef CAM_HAS_DISP_BUTTON
91
92 #define SHORTCUT_TOGGLE_RAW KEY_HELP // replacement for 'DISP', note the possible ALT button conflict
93
94 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
95 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
96 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
97
98 #define CAM_QUALITY_OVERRIDE 1
99
100 #undef CAM_USB_EVENTID
101 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
102 #define CAM_MISSING_RAND 1 // srand()/rand() functions not found in firmware. If defined, CHDK use functions implemented in C
103 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
104
105 #define REMOTE_SYNC_STATUS_LED 0xC0220120 // (green LED) specifies an LED that turns on while camera waits for USB remote to sync
106 #undef CAM_AF_LED
107 #define CAM_AF_LED 1
108
109 #define CAM_SD_OVER_IN_AF 1
110 #define CAM_HAS_FILEWRITETASK_HOOK 1
111 #define CAM_FILEWRITETASK_SEEKS 1
112
113 //--------------------------------------------------