1 // Camera - sx230hs - platform_camera.h
2
3 // This file contains the various settings values specific to the SX230HS camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
24 #define CAM_AV_OVERRIDE_IRIS_FIX 1
25 #undef CAM_KEY_PRESS_DELAY
26 #define CAM_KEY_PRESS_DELAY 60 // delay after a press
27 #define CAM_ADJUSTABLE_ALT_BUTTON 1
28 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Display" }
29 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_DISPLAY }
30 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
31
32 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
33
34 #undef CAM_AF_LED
35 #define CAM_AF_LED 1
36
37 #define CAM_DRYOS_2_3_R39 1
38 #define CAM_DRYOS_2_3_R47 1
39 #define CAM_PROPSET 4
40 #define CAM_DATE_FOLDER_NAMING 0x400
41 #define CAM_DRYOS 1
42 #define CAM_RAW_ROWPIX 4168
43 #define CAM_RAW_ROWS 3060
44
45 #define CAM_HAS_CMOS 1
46
47 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
48 #define CAM_HAS_VIDEO_BUTTON 1
49 #define CAM_VIDEO_QUALITY_ONLY 1
50
51 #undef CAM_VIDEO_CONTROL
52
53 #define CAM_HAS_JOGDIAL 1
54 #undef CAM_USE_ZOOM_FOR_MF
55
56 #undef CAM_UNCACHED_BIT
57 #define CAM_UNCACHED_BIT 0x40000000
58
59 #define CAM_DNG_LENS_INFO { 50,10, 700,10, 31,10, 59,10 } // See comments in camera.h
60 #define cam_CFAPattern 0x02010100
61
62 #define CAM_COLORMATRIX1 \
63 544808, 1000000, -174047, 1000000, -80399, 1000000, \
64 -75055, 1000000, 440444, 1000000, 11367, 1000000, \
65 -5801, 1000000, 71589, 1000000, 118914, 1000000
66
67 #define cam_CalibrationIlluminant1 17
68
69 #define CAM_JPEG_WIDTH 4000
70 #define CAM_JPEG_HEIGHT 3000
71
72 #define CAM_ACTIVE_AREA_X1 92
73 #define CAM_ACTIVE_AREA_Y1 16
74 #define CAM_ACTIVE_AREA_X2 4164
75 #define CAM_ACTIVE_AREA_Y2 3058 // the bottom most row has weird artifacts, rounded to 3058 to keep size even
76
77 #define PARAM_CAMERA_NAME 4
78 #undef CAM_SENSOR_BITS_PER_PIXEL
79 #define CAM_SENSOR_BITS_PER_PIXEL 12
80
81 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory
82
83 #undef CAM_HAS_ERASE_BUTTON
84 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
85
86 #undef CAM_USES_ASPECT_CORRECTION
87 #define CAM_USES_ASPECT_CORRECTION 1
88 #undef CAM_SCREEN_WIDTH
89 #undef CAM_BITMAP_WIDTH
90 #undef CAM_BITMAP_HEIGHT
91 #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates
92 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
93 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
94
95 #undef EDGE_HMARGIN
96 #define EDGE_HMARGIN 10
97
98 #define CAM_ZEBRA_NOBUF 1
99
100 #define CAM_QUALITY_OVERRIDE 1
101
102 #undef CAMERA_MIN_DIST
103 #define CAMERA_MIN_DIST 99 // Override min subject distance
104
105 #define CAM_HAS_GPS 1
106
107 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
108
109
110 #define REMOTE_SYNC_STATUS_LED 0xC0220130 // specifies an LED that turns on while camera waits for USB remote to sync
111
112 #define CAM_HAS_MOVIE_DIGEST_MODE 1
113
114 #define CAM_HAS_FILEWRITETASK_HOOK 1 // file write hook for remote capture etc
115
116 #define CAM_SD_OVER_IN_AFL 1
117 #define CAM_SD_OVER_IN_MF 1
118
119 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
120
121 // from test results in http://chdk.setepontos.com/index.php?topic=10833.100 sx220hs allows longer filenames than some other dryos r47 cams
122 // sx230 assumed to be the same
123 #undef CAM_MAX_FNAME_LENGTH
124 #define CAM_MAX_FNAME_LENGTH 57
125
126 //--------------------------------------------------