root/platform/ixus220_elph300hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - ixus220 / elph300hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the ixus220 / elph300hs camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS_2_3_R47               1
  24     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
  25     #undef  CAM_KEY_PRESS_DELAY
  26     #define CAM_KEY_PRESS_DELAY             60      // delay after a press
  27     #define CAM_ADJUSTABLE_ALT_BUTTON       1
  28     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Video" }
  29     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_VIDEO }
  30     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
  31 
  32     #define CAM_DRYOS_2_3_R39               1
  33     #define CAM_PROPSET                     4
  34     #define CAM_DATE_FOLDER_NAMING          0x400
  35     #define CAM_DRYOS                       1
  36     #define CAM_RAW_ROWPIX                  4168
  37     #define CAM_RAW_ROWS                    3060    // actual size from fw 12754080pix at FF375484 -> 19131120/12*8
  38     #define CAM_HAS_ND_FILTER               1
  39     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  40     #define CAM_HAS_VIDEO_BUTTON            1
  41     #define CAM_VIDEO_QUALITY_ONLY          1
  42     #undef  CAM_VIDEO_CONTROL
  43     #undef  CAM_USE_ZOOM_FOR_MF
  44     #undef  CAM_UNCACHED_BIT                        // shut up compiler
  45     #define CAM_UNCACHED_BIT                0x40000000
  46 
  47     #undef  DNG_BADPIXEL_VALUE_LIMIT
  48     #define DNG_BADPIXEL_VALUE_LIMIT        16      // Camera sensor apparently has bad pixels with value > 0 & <=16
  49 
  50     #define CAM_DNG_LENS_INFO               { 43,10, 215,10, 27,10, 59,10 } // See comments in camera.h
  51     #define cam_CFAPattern  0x02010100
  52 
  53     #define CAM_COLORMATRIX1    \
  54     544808, 1000000, -174047, 1000000, -80399, 1000000, \
  55     -75055, 1000000,  440444, 1000000,  11367, 1000000, \
  56      -5801, 1000000,   71589, 1000000, 118914, 1000000
  57 
  58     #define cam_CalibrationIlluminant1      1
  59 
  60     #define CAM_JPEG_WIDTH                  4000
  61     #define CAM_JPEG_HEIGHT                 3000
  62     #define CAM_ACTIVE_AREA_X1              120
  63     #define CAM_ACTIVE_AREA_Y1              36
  64     #define CAM_ACTIVE_AREA_X2              4136
  65     #define CAM_ACTIVE_AREA_Y2              3040
  66     #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData
  67     #undef  CAM_SENSOR_BITS_PER_PIXEL
  68     #define CAM_SENSOR_BITS_PER_PIXEL       12
  69     #undef  CAM_HAS_ERASE_BUTTON
  70     #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
  71 
  72     #undef  CAM_USES_ASPECT_CORRECTION
  73     #define CAM_USES_ASPECT_CORRECTION      1       //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
  74     #undef  CAM_BITMAP_WIDTH
  75     #undef  CAM_BITMAP_HEIGHT
  76     #define CAM_BITMAP_WIDTH                960     // Actual width of bitmap screen in bytes
  77     #define CAM_BITMAP_HEIGHT               270     // Actual height of bitmap screen in rows
  78 
  79     #undef  EDGE_HMARGIN
  80     #define EDGE_HMARGIN                    10
  81 
  82     #define CAM_ZEBRA_NOBUF                 1
  83 
  84     #define CAM_QUALITY_OVERRIDE            1
  85 
  86     #undef  CAM_HAS_IRIS_DIAPHRAGM
  87     #undef  CAM_HAS_MANUAL_FOCUS
  88 
  89 
  90     #define CAM_HAS_CMOS                    1
  91 
  92     #define REMOTE_SYNC_STATUS_LED          0xC0220130  // specifies an LED that turns on while camera waits for USB remote to sync
  93 
  94     #define CAM_CHDK_HAS_EXT_VIDEO_TIME     1
  95     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1     // Draw pixels on active bitmap buffer only.
  96 
  97     #define CAM_SD_OVER_IN_AF               1
  98     #define CAM_SD_OVER_IN_AFL              1
  99     #define CAM_SD_OVER_IN_MF               1
 100 
 101 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */