root/platform/sx130is/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - sx130is - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the sx130is camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     4
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1
  26 
  27     #define CAM_RAW_ROWPIX                  4080
  28     #define CAM_RAW_ROWS                    3048
  29 
  30     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  31     #define CAM_VIDEO_QUALITY_ONLY          1
  32     #define CAM_BRACKETING                  1
  33     #undef  CAM_VIDEO_CONTROL
  34     #define CAM_MULTIPART                   1
  35     #define CAM_HAS_JOGDIAL                 1
  36     #undef  CAM_USE_ZOOM_FOR_MF
  37     #undef  CAM_UNCACHED_BIT
  38     #define CAM_UNCACHED_BIT                0x40000000
  39 
  40     #define CAM_DNG_LENS_INFO               { 50,10, 600,10, 34,10, 56,10 } // See comments in camera.h
  41     // pattern
  42     #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
  43     // color
  44     #define CAM_COLORMATRIX1                               \
  45       827547, 1000000, -290458, 1000000, -126086, 1000000, \
  46       -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  47         5181, 1000000,   48183, 1000000,  245014, 1000000
  48     #define cam_CalibrationIlluminant1      1 // Daylight
  49 
  50     // cropping
  51     #define CAM_JPEG_WIDTH                  4000
  52     #define CAM_JPEG_HEIGHT                 3000
  53     #define CAM_ACTIVE_AREA_X1              36
  54     #define CAM_ACTIVE_AREA_Y1              20
  55     #define CAM_ACTIVE_AREA_X2              4036
  56     #define CAM_ACTIVE_AREA_Y2              3020
  57     // camera name
  58     #define PARAM_CAMERA_NAME               4 // parameter number for GetParameterData
  59     #undef  CAM_SENSOR_BITS_PER_PIXEL
  60     #define CAM_SENSOR_BITS_PER_PIXEL       12
  61 
  62     #define CAM_QUALITY_OVERRIDE            1
  63 
  64     // copied from the SX200 which has the same video buffer size
  65     #undef  CAM_USES_ASPECT_CORRECTION
  66     #define CAM_USES_ASPECT_CORRECTION      1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 
  67     #undef CAM_BITMAP_WIDTH
  68     #define CAM_BITMAP_WIDTH                720 // Actual width of bitmap screen in bytes
  69 
  70     #define CAM_ZEBRA_NOBUF                 1
  71 
  72     //#undef EDGE_HMARGIN
  73     //#define EDGE_HMARGIN                  28
  74     #define CAM_DATE_FOLDER_NAMING          0x400 //Value found in the last function, which is called in GetImageFolder. (first compare)
  75 
  76     // CR2 accesible through USB 
  77     #undef  DEFAULT_RAW_EXT
  78     #define DEFAULT_RAW_EXT                 2
  79 
  80     
  81     #define CAM_USE_ALT_SET_ZOOM_POINT      1   // Define to use the alternate code in lens_set_zoom_point()
  82     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1  // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  83 
  84     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
  85                                                 // Used to enabled bracketing in custom timer, required on many recent cameras
  86                                                 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
  87 
  88     #define REMOTE_SYNC_STATUS_LED          0xC0220014  // specifies an LED that turns on while camera waits for USB remote to sync
  89 
  90     #define CAM_SD_OVER_IN_AF               1
  91     #define CAM_HAS_FILEWRITETASK_HOOK          1   // file write hook for remote capture etc
  92 
  93     #define CAM_SD_OVER_IN_AFL              1
  94     #define CAM_SD_OVER_IN_MF               1
  95 
  96 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */