root/platform/sx160is/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - SX160IS - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the SX160IS camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                                 5
  24     #define CAM_DRYOS                                   1
  25     #define CAM_DRYOS_2_3_R39                           1
  26     #define CAM_DRYOS_2_3_R47                           1 // Defined for cameras with DryOS version R47 or higher
  27 
  28     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  29     #define CAM_BRACKETING                              1
  30     #define CAM_HAS_JOGDIAL                             1
  31 
  32     #define CAM_ADJUSTABLE_ALT_BUTTON                   1
  33     #define CAM_ALT_BUTTON_NAMES                        { "Playback", "Video", "Display" }
  34     #define CAM_ALT_BUTTON_OPTIONS                      { KEY_PLAYBACK, KEY_VIDEO, KEY_DISPLAY }
  35 
  36     // pattern
  37     #define cam_CFAPattern                              0x01000201 // Green  Blue  Red  Green
  38     // color
  39     #define CAM_COLORMATRIX1                               \
  40       1301431, 1000000,  -469837, 1000000, -102652, 1000000, \
  41       -200195, 1000000,   961551, 1000000,  238645, 1000000, \
  42        -16441, 1000000,   142319, 1000000,  375979, 1000000
  43     #define cam_CalibrationIlluminant1                  1 // Daylight
  44  
  45     // Sensor size, DNG image size & cropping
  46     #define CAM_RAW_ROWPIX                            4704 // Found @0xff95b0b8 sx160is 100a
  47     #define CAM_RAW_ROWS                              3504 // Found @0xff95b0c4 sx160is 100a
  48 
  49     #undef  CAM_UNCACHED_BIT
  50     #define CAM_UNCACHED_BIT                    0x40000000 // Found @0xff82ec94 sx160is 100a
  51 
  52     #define CAM_JPEG_WIDTH                            4608
  53     #define CAM_JPEG_HEIGHT                           3456
  54     #define CAM_ACTIVE_AREA_X1                          12
  55     #define CAM_ACTIVE_AREA_Y1                          10
  56     #define CAM_ACTIVE_AREA_X2                        4668
  57     #define CAM_ACTIVE_AREA_Y2                        3490
  58 
  59     #undef  CAM_SENSOR_BITS_PER_PIXEL
  60     #define CAM_SENSOR_BITS_PER_PIXEL                   12
  61 
  62     #define CAM_DNG_LENS_INFO                           { 50,10, 800,10, 35,10, 59,10 } // See comments in camera.h
  63 
  64     #define CAM_QUALITY_OVERRIDE                        1
  65 
  66     #define CAM_HAS_VIDEO_BUTTON                        1
  67     #define CAM_VIDEO_QUALITY_ONLY                      1
  68     #undef  CAM_VIDEO_CONTROL
  69     #define CAM_HAS_MOVIE_DIGEST_MODE                   1   //Camera doesn't actually have MOVIE_DIGEST_MOVIE, but this is required by is_video_recording.
  70                                                             //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
  71     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE           1   // Binned mode, no valid raw data
  72 
  73     #define CAM_AV_OVERRIDE_IRIS_FIX            1  // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
  74 
  75     #undef  CAM_USES_ASPECT_CORRECTION
  76     #define CAM_USES_ASPECT_CORRECTION                  1
  77     #undef  CAM_BITMAP_WIDTH
  78     #define CAM_BITMAP_WIDTH                          960 // Actual width of bitmap screen in bytes (may be larger than displayed area)
  79     #undef  CAM_BITMAP_HEIGHT
  80     #define CAM_BITMAP_HEIGHT                         270 // Actual height of bitmap screen in rows (240 or 270)
  81     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY           1   // Draw pixels on active bitmap buffer only.
  82 
  83     #define CAM_HAS_FILEWRITETASK_HOOK                  1
  84     #define CAM_FILEWRITETASK_SEEKS                     1
  85 
  86     #define CAM_ZEBRA_NOBUF                             1
  87 
  88     #define PARAM_CAMERA_NAME                           4 // parameter number for GetParameterData
  89 
  90     #define CAM_LOAD_CUSTOM_COLORS                      1 // Enable loading CHDK colors into the camera palette memory/hardware
  91 
  92     #define CAM_DATE_FOLDER_NAMING                  0x400
  93 
  94     #define CAM_DRIVE_MODE_FROM_TIMER_MODE              1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
  95                                                           // Used to enabled bracketing in custom timer, required on many recent cameras
  96                                                           // see http://chdk.setepontos.com/index.php/topic,3994.405.html
  97 
  98     #undef  CAM_USE_ZOOM_FOR_MF
  99     #define CAM_NEED_SET_ZOOM_DELAY                   300 // Define to add a delay after setting the zoom position
 100     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS             1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
 101     #define CAM_USE_ALT_SET_ZOOM_POINT                  1 // Define to use the alternate code in lens_set_zoom_point()
 102     #define CAM_USE_ALT_PT_MoveOpticalZoomAt            1 // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 103 
 104     #undef  CAM_USB_EVENTID
 105     #define CAM_USB_EVENTID                         0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
 106 
 107 //  define REMOTE_SYNC_STATUS_LED              0xC0220120 // specifies an LED that turns on while camera waits for USB remote to sync
 108     #define CAM_REMOTE_HDMI_HPD                 1 // Camera supports using HDMI hotplug detect for remote signal
 109     #define CAM_REMOTE_HDMI_POWER_OVERRIDE      1 // Camera requires HDMI power to be forced on in rec mode
 110     #define CAM_REMOTE_ANALOG_AV                1 // Camera supports analog AV detect for remote signal
 111 
 112     #undef CAM_AF_LED
 113     #define CAM_AF_LED                                  1
 114 
 115     #define MKDIR_RETURN_ONE_ON_SUCCESS                 1 // mkdir() return 1 on success, 0 on fail.
 116 
 117     #define CAM_SD_OVER_IN_AF                           1
 118     #define CAM_SD_OVER_IN_MF                           1
 119 
 120     #define CAM_IS_VID_REC_WORKS                        1   // is_video_recording() function works    
 121 
 122 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */