1 // Camera - sx200is - platform_camera.h
2
3 // This file contains the various settings values specific to the sx200is camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4080 // from calcs see 100C lib.c
27 #define CAM_RAW_ROWS 3048 // " " " " "
28
29 #define CAM_VIDEO_QUALITY_ONLY 1
30
31 #undef CAM_VIDEO_CONTROL
32 #define CAM_MULTIPART 1
33 #define CAM_HAS_JOGDIAL 1
34 #undef CAM_USE_ZOOM_FOR_MF
35 #undef CAM_UNCACHED_BIT // shut up compiler
36 #define CAM_UNCACHED_BIT 0x40000000
37
38 #define CAM_DNG_LENS_INFO { 50,10, 600,10, 34,10, 53,10 } // See comments in camera.h
39 // pattern
40 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
41 // color
42 //need fixing *****************************************************
43 #define CAM_COLORMATRIX1 \
44 14134, 1000000, -5576, 1000000, -1527, 1000000, \
45 -1991, 1000000, 10719, 1000000, 1273, 1000000, \
46 -1158, 1000000, 1929, 1000000, 3581, 1000000
47
48 #define cam_CalibrationIlluminant1 17 // Standard Light A
49 // cropping
50 #define CAM_JPEG_WIDTH 4000
51 #define CAM_JPEG_HEIGHT 3000
52 #define CAM_ACTIVE_AREA_X1 52
53 #define CAM_ACTIVE_AREA_Y1 14
54 #define CAM_ACTIVE_AREA_X2 4052
55 #define CAM_ACTIVE_AREA_Y2 3014
56 // camera name
57 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
58
59 #undef CAM_SENSOR_BITS_PER_PIXEL
60 #define CAM_SENSOR_BITS_PER_PIXEL 12
61
62 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
63
64 #undef CAM_HAS_ERASE_BUTTON
65 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
66 #undef CAM_BITMAP_WIDTH
67 #undef CAM_BITMAP_HEIGHT
68 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
69 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
70
71 #undef CAM_USES_ASPECT_CORRECTION
72 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
73
74 #undef EDGE_HMARGIN
75 #if defined(OPT_CHDK_IN_EXMEM)
76 #define EDGE_HMARGIN 0
77 #else
78 #define EDGE_HMARGIN 20
79 #endif
80
81 #define CAM_QUALITY_OVERRIDE 1
82 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
83
84 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
85 // Used to enabled bracketing in custom timer, required on many recent cameras
86 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
87 #define REMOTE_SYNC_STATUS_LED 0xC0220138 // specifies an LED that turns on while camera waits for USB remote to sync
88 #define CAM_REMOTE_AtoD_CHANNEL 5 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll
89
90 #undef CAMERA_MIN_DIST
91 #define CAMERA_MIN_DIST 58 // Override min subject distance
92 #undef CAMERA_MAX_DIST
93 #define CAMERA_MAX_DIST 68447 // Override max subject distance
94
95 #define CAM_HAS_FILEWRITETASK_HOOK 1
96
97 #define CAM_SD_OVER_IN_AF 1
98 #define CAM_SD_OVER_IN_AFL 1
99 #define CAM_SD_OVER_IN_MF 1
100
101 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
102
103 //--------------------------------------------------