1 // Camera - ixus980_sd990 - platform_camera.h 2 3 // This file contains the various settings values specific to the ixus980_sd990 camera. 4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly. 5 6 // If adding a new settings value put a suitable default in 'include/camera.h', 7 // along with documentation on what the setting does and how to determine the correct value. 8 // If the setting should not have a default value then add it in 'include/camera.h' 9 // using the '#undef' directive along with appropriate documentation. 10 11 // Override any default values with your camera specific values in this file. Try and avoid 12 // having override values that are the same as the default value. 13 14 // When overriding a setting value there are two cases: 15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. 16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value 17 // followed by a '#define' to set the new value. 18 19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h' 20 // for information on each setting. If the default values are correct for your camera then 21 // don't override them again in here. 22 23 #define CAM_PROPSET 2 // all values checked so far match propset 2 24 #define CAM_DRYOS 1 25 26 #define CAM_RAW_ROWPIX 4480 // 14.7 MP 12bpp 27 #define CAM_RAW_ROWS 3348 28 29 #undef CAM_CIRCLE_OF_CONFUSION 30 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html) 31 32 #undef CAM_USE_ZOOM_FOR_MF 33 #undef CAM_HAS_ERASE_BUTTON 34 #define CAM_MULTIPART 1 35 #undef CAM_HAS_IRIS_DIAPHRAGM 36 #define CAM_HAS_ND_FILTER 1 37 #define CAM_HAS_HI_ISO_AUTO_MODE 1 38 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 39 #undef CAM_VIDEO_CONTROL 40 #undef CAM_UNCACHED_BIT // shut up compiler 41 #define CAM_UNCACHED_BIT 0x40000000 42 43 #define CAM_LOAD_CUSTOM_COLORS 1 44 45 #define CAM_HAS_JOGDIAL 1 46 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1 47 #define CAM_VIDEO_QUALITY_ONLY 1 48 #undef CAM_SENSOR_BITS_PER_PIXEL 49 #define CAM_SENSOR_BITS_PER_PIXEL 12 50 51 #define CAM_DNG_LENS_INFO { 77,10, 285,10, 28,10, 58,10 } // See comments in camera.h 52 // pattern 53 #define cam_CFAPattern 0x01000201 // Green Blue Red Green 54 // color preliminary 55 #define CAM_COLORMATRIX1 \ 56 837237, 1000000, -290137, 1000000, -128156, 1000000, \ 57 -127762, 1000000, 643909, 1000000, 52973, 1000000, \ 58 4446, 1000000, 88354, 1000000, 224246, 1000000 59 60 #define cam_CalibrationIlluminant1 1 // Daylight 61 // cropping 62 #define CAM_JPEG_WIDTH 4416 63 #define CAM_JPEG_HEIGHT 3312 64 #define CAM_ACTIVE_AREA_X1 12 65 #define CAM_ACTIVE_AREA_Y1 12 66 #define CAM_ACTIVE_AREA_X2 4444 67 #define CAM_ACTIVE_AREA_Y2 3324 68 // camera name 69 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData sd990: OK 70 71 // copied from DavidBs D10 stuff 72 #undef CAM_USES_ASPECT_CORRECTION 73 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 74 #undef CAM_BITMAP_WIDTH 75 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes 76 77 // #define DNG_EXT_FROM ".CR2" 78 79 #define CAM_HAS_FILEWRITETASK_HOOK 1 80 81 #define REMOTE_SYNC_STATUS_LED 0xc02200BC // specifies an LED that turns on while camera waits for USB remote to sync 82 83 #define CAM_SD_OVER_IN_AF 1 84 #define CAM_SD_OVER_IN_AFL 1 85 #define CAM_SD_OVER_IN_MF 1 86 87 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works 88 89 //--------------------------------------------------