1 // Camera - d10 - platform_camera.h
2
3 // This file contains the various settings values specific to the d10 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4104 // 12 MP 12bpp
27 #define CAM_RAW_ROWS 3048 // from " CrwAddress %lx, CrwSize H %ld V %ld\r"
28
29 #undef CAM_CIRCLE_OF_CONFUSION
30 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
31
32 #undef CAM_HAS_ERASE_BUTTON
33 #undef CAM_USE_ZOOM_FOR_MF
34 #define CAM_MULTIPART 1
35 #undef CAM_HAS_IRIS_DIAPHRAGM
36 #define CAM_HAS_ND_FILTER 1
37
38 // long shutter is acutally user TV, may work ?
39 #undef CAM_HAS_USER_TV_MODES
40 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
41
42 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
43
44
45 #undef CAM_VIDEO_CONTROL
46 #define CAM_VIDEO_QUALITY_ONLY 1
47
48 #undef CAM_UNCACHED_BIT
49 #define CAM_UNCACHED_BIT 0x40000000
50
51 // OK looks similar to ixus100 based on forum posts
52
53 #define CAM_QUALITY_OVERRIDE 1
54 #undef CAM_SENSOR_BITS_PER_PIXEL
55 #define CAM_SENSOR_BITS_PER_PIXEL 12
56
57 #define CAM_DNG_LENS_INFO { 62,10, 186,10, 28,10, 49,10 } // See comments in camera.h
58
59 #define cam_CFAPattern 0x01000201 // Green Blue Red Green
60
61 #define CAM_COLORMATRIX1 \
62 14052, 10000, -5229, 10000, -1156, 10000, \
63 -1325, 10000, 9420, 10000, 2252, 10000, \
64 -498, 10000, 1957, 10000, 4116, 10000
65 #define cam_CalibrationIlluminant1 21 // D65
66
67 // cropping OK
68 #define CAM_JPEG_WIDTH 4000
69 #define CAM_JPEG_HEIGHT 3000
70 #define CAM_ACTIVE_AREA_X1 0 // some data all the way to left, normal 8 ?
71 #define CAM_ACTIVE_AREA_Y1 10
72 #define CAM_ACTIVE_AREA_X2 4072 // or 4024
73 #define CAM_ACTIVE_AREA_Y2 3040 // or 3041 or 3020
74
75 // camera name OK
76 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
77
78 //aspect correction
79 #undef CAM_USES_ASPECT_CORRECTION
80 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
81 #undef CAM_BITMAP_WIDTH
82 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
83
84 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
85 // Used to enabled bracketing in custom timer, required on many recent cameras
86 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
87 #define REMOTE_SYNC_STATUS_LED 0xc0220134 // specifies an LED that turns on while camera waits for USB remote to sync
88 #define CAM_REMOTE_ANALOG_AV 1 // Camera supports analog AV detect for remote signal
89 #define CAM_REMOTE_AtoD_CHANNEL 5 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll
90 // D10 - Open circuit = 1023, 10k ohm = ~350, 3.5k = ~150
91 //#define CAM_REMOTE_AtoD_THRESHOLD 200 // 3rd battery terminal A/D reading threshold ( lower = 1, higher = 0 )
92
93 #undef CAMERA_MIN_DIST
94 #define CAMERA_MIN_DIST 30 // Override min subject distance
95 #undef CAMERA_MAX_DIST
96 #define CAMERA_MAX_DIST 193731 // Override max subject distance
97
98 #undef CAM_AF_LED
99 #define CAM_AF_LED 2
100
101 #define CAM_HAS_FILEWRITETASK_HOOK 1 // file write hook for remote capture etc
102
103 #define CAM_SD_OVER_IN_AF 1
104 #define CAM_SD_OVER_IN_AFL 1
105 #define CAM_SD_OVER_IN_MF 1
106
107 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
108 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
109
110 //--------------------------------------------------