1 // Camera - G7x - platform_camera.h
2
3 // This file contains the various settings values specific to the G7x camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 7
24
25 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
26 #define CAM_HAS_NATIVE_ND_FILTER 1 // Camera has built-in ND filter with Canon menu support for enable/disable
27 #define CAM_HAS_ND_FILTER 1 // Camera has built-in ND filter (in addition to iris)
28
29 #define CAM_BRACKETING 1 // camera has native bracketing
30
31 #undef CAM_KEY_PRESS_DELAY
32 #define CAM_KEY_PRESS_DELAY 60 // delay after a press
33
34 #define CAM_ADJUSTABLE_ALT_BUTTON 1
35
36 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
37 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI}
38 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
39
40 // default zebra shortcut (left) conflicts with canon AF lock
41 #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU
42
43 #define CAM_DRYOS 1
44 #define CAM_DRYOS_2_3_R39 1
45 #define CAM_DRYOS_2_3_R47 1
46
47 #define CAM_RAW_ROWPIX 5632
48 #define CAM_RAW_ROWS 3710
49
50 #define CAM_HAS_CMOS 1
51
52 // unlocked by default, not needed
53 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
54 #define CAM_HAS_VIDEO_BUTTON 1
55
56 #undef CAM_HAS_DISP_BUTTON
57 #undef CAM_USE_ZOOM_FOR_MF
58
59 // not implemented
60 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
61 #undef CAM_VIDEO_CONTROL
62
63 // minimal recording or not only
64 #define CAM_SIMPLE_MOVIE_STATUS 1
65
66 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works
67
68 #define CAM_HAS_JOGDIAL 1
69 #undef CAM_USE_ZOOM_FOR_MF
70
71 // OK
72 #undef CAM_UNCACHED_BIT
73 #define CAM_UNCACHED_BIT 0x40000000
74
75 #undef CAM_CIRCLE_OF_CONFUSION
76 #define CAM_CIRCLE_OF_CONFUSION 11 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
77
78 // OK
79 #define CAM_DNG_LENS_INFO { 88,10,368,10,18,10,28,10 }
80 // OK
81 #define cam_CFAPattern 0x02010100
82
83 #define cam_CalibrationIlluminant1 17
84
85 // from CR2 converted to DNG with adobe DNG converter
86 #define CAM_COLORMATRIX1 \
87 11125, 10000, -5937, 10000, 355, 10000, \
88 -2979, 10000, 10926, 10000, 2360, 10000, \
89 -116, 10000, 835, 10000, 6064, 10000
90
91 #define cam_CalibrationIlluminant2 21 // D65
92
93 #define CAM_COLORMATRIX2 \
94 9602, 10000, -3823, 10000, -937, 10000, \
95 -2984, 10000, 11495, 10000, 1675, 10000, \
96 -407, 10000, 1415, 10000, 5049, 10000,
97
98 #define CAM_FORWARDMATRIX1 \
99 4264, 10000, 4193, 10000, 1187, 10000, \
100 1832, 10000, 7811, 10000, 357, 10000, \
101 854, 10000, 16, 10000, 7381, 10000
102
103 #define CAM_FORWARDMATRIX2 \
104 4036, 10000, 4056, 10000, 1551, 10000, \
105 1780, 10000, 7757, 10000, 463, 10000, \
106 764, 10000, 1, 10000, 7487, 10000
107
108 #define CAM_JPEG_WIDTH 5472
109 #define CAM_JPEG_HEIGHT 3648
110
111 // TODO - from cr2
112 #define CAM_ACTIVE_AREA_X1 132
113 #define CAM_ACTIVE_AREA_Y1 40
114 #define CAM_ACTIVE_AREA_X2 5604
115 #define CAM_ACTIVE_AREA_Y2 3688
116
117 #define PARAM_CAMERA_NAME 3
118 // found by calling GetImageFolder with single bits sets
119 #define CAM_DATE_FOLDER_NAMING 0x80
120 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
121 #undef CAM_SENSOR_BITS_PER_PIXEL
122 #define CAM_SENSOR_BITS_PER_PIXEL 12
123
124 // black level appears to be ~512 in normal shooting (ISO125 P or M)
125 #undef CAM_BLACK_LEVEL
126 #define CAM_BLACK_LEVEL 511
127
128 // TODO expdrv not implemented, but camera does multi-minute exposures natively
129 // this allows > 60s in overrid (untested)
130 #define CAM_EXT_TV_RANGE 1
131
132 // TODO actual range untested
133 // #undef CAM_EXT_AV_RANGE
134 // #define CAM_EXT_AV_RANGE ? // Number of 1/3 stop increments to extend the Av range beyond the Canon default smallest aperture
135
136 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
137
138 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
139
140 #undef CAM_BITMAP_WIDTH
141 #undef CAM_BITMAP_HEIGHT
142 #undef CAM_SCREEN_WIDTH
143 #undef CAM_SCREEN_HEIGHT
144 #define CAM_BITMAP_WIDTH 736 // Actual width of bitmap screen in <s>bytes</s> pixels
145 #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows
146 #define CAM_SCREEN_WIDTH 720 // Width of bitmap screen in CHDK co-ordinates (360 or 480)
147 #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far)
148 #define CAM_SUPPORT_BITMAP_RES_CHANGE 1
149
150
151 #undef EDGE_HMARGIN
152 #define EDGE_HMARGIN 10
153
154 // doesn't appear to use complicated multi pass or seek in normal cases
155 #define CAM_HAS_FILEWRITETASK_HOOK 1
156 //#define CAM_FILEWRITETASK_SEEKS 1
157
158 #undef CAM_BITMAP_PALETTE
159 #define CAM_BITMAP_PALETTE 100
160
161 #define CAM_ZEBRA_NOBUF 1
162
163 #undef CAMERA_MIN_DIST
164 #define CAMERA_MIN_DIST 50 // Override min subject distance, min get_focus() value using MF
165 #undef CAMERA_MAX_DIST
166 #define CAMERA_MAX_DIST 177552 // Override max subject distance, max get_focus() value at max zoom using MF before it goes to -1
167
168
169 //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
170
171 #undef CAM_USB_EVENTID
172 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
173
174 // #define CAM_HAS_MOVIE_DIGEST_MODE 1
175
176 // TODO - haven't checked default values, these seem to work
177 #define CAM_NEED_SET_ZOOM_DELAY 300
178
179 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
180
181 #undef REMOTE_SYNC_STATUS_LED
182 // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync
183 #define CAM_REMOTE_HDMI_HPD 1 // Camera supports using HDMI hotplug detect for remote signal
184 #define CAM_REMOTE_HDMI_POWER_OVERRIDE 1 // Camera requires HDMI power to be forced on in rec mode
185 #define CAM_REMOTE_ANALOG_AV 1 // Camera supports analog AV detect for remote signal
186 #define CAM_REMOTE_AtoD_CHANNEL 3 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll
187 // g7x - Open circuit = ~4090, 10k ohm = ~1380 (=25c bat temp), 3.5k = ~620 (55c)
188 #undef CAM_REMOTE_AtoD_THRESHOLD
189 #define CAM_REMOTE_AtoD_THRESHOLD 800 // 3rd battery terminal A/D reading threshold ( lower = 1, higher = 0 )
190
191 // crashes with ASSERT!! FocusLensController.c Line 1106 on shoot
192 // #define CAM_SD_OVER_IN_AF 1
193 #define CAM_SD_OVER_IN_AFL 1
194 #define CAM_SD_OVER_IN_MF 1
195
196 // "real" to "market" conversion definitions
197 #define SV96_MARKET_OFFSET 0 // market and real appear to be identical on this cam
198 #define ISO_MARKET_TO_REAL_MULT 1
199 #define ISO_MARKET_TO_REAL_SHIFT 0
200 #define ISO_MARKET_TO_REAL_ROUND 0
201 #define ISO_REAL_TO_MARKET_MULT 1
202 #define ISO_REAL_TO_MARKET_SHIFT 0
203 #define ISO_REAL_TO_MARKET_ROUND 0
204
205 // AF led, for MD test code
206 #undef CAM_AF_LED
207 #define CAM_AF_LED 1
208
209 #define CAM_HAS_CANON_RAW 1 // has native Canon raw
210 #define CAM_CLEAN_OVERLAY 1
211
212 #define CAM_HAS_WIFI 1 // Camera has wifi support
213
214 //--------------------------------------------------