1 // Camera - A1200 - platform_camera.h
2
3 // This file contains the various settings values specific to the A1200 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 4
25
26 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
27 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
28
29 #define CAM_RAW_ROWPIX 4104 // Found @0xff937e98
30 #define CAM_RAW_ROWS 3048 // Found @0xff937ea4
31
32 #undef CAM_UNCACHED_BIT
33 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff83a2e0
34
35 #define CAM_JPEG_WIDTH 4000
36 #define CAM_JPEG_HEIGHT 3000
37 #define CAM_ACTIVE_AREA_X1 0
38 #define CAM_ACTIVE_AREA_Y1 10
39 #define CAM_ACTIVE_AREA_X2 4072
40 #define CAM_ACTIVE_AREA_Y2 3040
41
42 #define CAM_DNG_LENS_INFO { 50,10, 200,10, 28,10, 59,10 } // See comments in camera.h
43
44 #undef CAM_SENSOR_BITS_PER_PIXEL
45 #define CAM_SENSOR_BITS_PER_PIXEL 12
46
47 #define cam_CFAPattern 0x01000201 // Green Blue Red Green
48 // #define cam_CFAPattern 0x02010100 // Red Green Green Blue
49
50 #define CAM_COLORMATRIX1 \
51 827547, 1000000, -290458, 1000000, -126086, 1000000, \
52 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
53 5181, 1000000, 48183, 1000000, 245014, 1000000
54
55 #define cam_CalibrationIlluminant1 1 // Daylight
56
57 #define CAM_ZEBRA_NOBUF 1
58
59 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
60
61 #define CAM_HAS_ND_FILTER 1
62
63 #define CAM_VIDEO_QUALITY_ONLY 1
64
65 #define CAM_DATE_FOLDER_NAMING 0x400
66
67 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
68
69 #undef CAM_HAS_IRIS_DIAPHRAGM
70
71 #undef CAM_HAS_ERASE_BUTTON
72
73 #undef CAM_HAS_IS // Camera does not have an image stabilizer
74
75 #undef CAM_HAS_MANUAL_FOCUS
76
77 #undef CAM_VIDEO_CONTROL
78
79 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
80
81 #define CAM_CAN_MUTE_MICROPHONE 1
82
83 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
84
85 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
86
87 #undef CAM_USES_ASPECT_CORRECTION
88 #define CAM_USES_ASPECT_CORRECTION 1
89 #undef CAM_BITMAP_WIDTH
90 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
91
92 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
93 #define CAM_ALT_BUTTON_NAMES { "Playback", "Face", "Disp" }
94 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_FACE, KEY_DISPLAY }
95
96 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
97 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
98
99 #undef CAM_AF_LED // AF Lamp index for camera_set_led()
100 #define CAM_AF_LED 2 //
101
102 #define CAM_REMOTE_USES_PRECISION_SYNC 1 // USB remote precision sync patch works with this camera
103 #define GPIO_VSYNC_CURRENT 0xC0F070C8 // vsync current status register used by USB remote precision sync
104
105 #define CAM_HAS_FILEWRITETASK_HOOK 1
106
107 #define CAM_SD_OVER_IN_AFL 1
108 #define CAM_SD_OVER_IN_MF 1
109
110 #define CAM_HAS_MOVIE_DIGEST_MODE 1
111
112 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
113
114 //--------------------------------------------------