root/platform/ixus125_elph110hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - ixus125/elph110hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the ixus125/elph110hs camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                           1
  24     #define CAM_PROPSET                         5
  25 
  26     #define CAM_DRYOS_2_3_R39                   1       // Defined for cameras with DryOS version R39 or higher
  27     #define CAM_DRYOS_2_3_R47                   1       // Defined for cameras with DryOS version R47 or higher
  28 
  29     #undef  CAM_UNCACHED_BIT
  30     #define CAM_UNCACHED_BIT                    0x40000000 // Found @0xff024684 ixus125 100d
  31 
  32     #define CAM_RAW_ROWPIX                      4784 // Found @0xff15d2f8 ixus125 100d
  33     #define CAM_RAW_ROWS                        3516 // Found @0xff15d304 ixus125 100d
  34 
  35     #define CAM_JPEG_WIDTH                      4608
  36     #define CAM_JPEG_HEIGHT                     3456
  37     #define CAM_ACTIVE_AREA_X1                  96
  38     #define CAM_ACTIVE_AREA_Y1                  18 // could use 17, but will change effective bayer pattern
  39     #define CAM_ACTIVE_AREA_X2                  4776
  40     #define CAM_ACTIVE_AREA_Y2                  3516 // image data goes all the way to the bottom
  41 
  42     #define CAM_DNG_LENS_INFO                   { 43,10, 215,10, 27,10, 59,10 } // See comments in camera.h ixus125
  43 
  44     #undef  CAM_SENSOR_BITS_PER_PIXEL
  45     #define CAM_SENSOR_BITS_PER_PIXEL           12
  46 
  47     #define cam_CFAPattern  0x02010100
  48 
  49     #define CAM_COLORMATRIX1    \
  50     544808, 1000000, -174047, 1000000, -80399, 1000000, \
  51     -75055, 1000000,  440444, 1000000,  11367, 1000000, \
  52      -5801, 1000000,   71589, 1000000, 118914, 1000000
  53 
  54     #undef  CAM_USE_ZOOM_FOR_MF
  55     #define CAM_BRACKETING                      1
  56     #undef  CAM_VIDEO_CONTROL
  57     #define CAM_VIDEO_QUALITY_ONLY              1
  58 
  59     #define CAM_HAS_CMOS                        1
  60     #define CAM_HAS_ND_FILTER                   1
  61     #undef  CAM_HAS_MANUAL_FOCUS
  62     #undef  CAM_HAS_IRIS_DIAPHRAGM
  63 
  64     #undef  CAM_HAS_ERASE_BUTTON
  65     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1
  66     #define CAM_DISABLE_RAW_IN_AUTO             1 // Does not appear to have valid raw in AUTO
  67 
  68     #define CAM_HAS_MOVIE_DIGEST_MODE           1
  69 
  70     #define CAM_HAS_VIDEO_BUTTON                1
  71 
  72     #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works
  73 
  74     #define cam_CalibrationIlluminant1          1
  75 
  76     #define PARAM_CAMERA_NAME                   4       // parameter number for GetParameterData
  77 
  78     #undef  CAM_USES_ASPECT_CORRECTION
  79     #define CAM_USES_ASPECT_CORRECTION          1
  80     #undef  CAM_BITMAP_WIDTH
  81     #undef  CAM_BITMAP_HEIGHT
  82     #define CAM_BITMAP_WIDTH                    960 // Actual width of bitmap screen in bytes
  83     #define CAM_BITMAP_HEIGHT                   270 // Actual height of bitmap screen in rows
  84 
  85     #define CAM_LOAD_CUSTOM_COLORS              1       // Enable loading CHDK colors into the camera palette memory/hardware
  86 
  87     #undef  EDGE_HMARGIN
  88     #define EDGE_HMARGIN                        10
  89 
  90     #define CAM_ZEBRA_NOBUF                     1
  91 
  92 //    #define CAM_USE_ZOOM_FOR_MF                  1    // Zoom lever can be used for manual focus adjustments
  93     #define CAM_NEED_SET_ZOOM_DELAY             100  // Define to add a delay after setting the zoom position
  94     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS     1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
  95 
  96     #define CAM_QUALITY_OVERRIDE                1
  97     #define CAM_DATE_FOLDER_NAMING              0x400
  98 
  99     #define CAM_DRIVE_MODE_FROM_TIMER_MODE      1
 100 
 101     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1
 102 
 103     #undef  CAM_USB_EVENTID
 104     #define CAM_USB_EVENTID                     0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 105     #define MKDIR_RETURN_ONE_ON_SUCCESS         1       // mkdir() return 1 on success, 0 on fail.
 106 
 107     #define CAM_HAS_FILEWRITETASK_HOOK      1
 108     #define CAM_FILEWRITETASK_SEEKS         1
 109 
 110     #define CAM_CHDK_HAS_EXT_VIDEO_TIME     1
 111 
 112 //    #define REMOTE_SYNC_STATUS_LED     0xC0220130   // specifies an LED that turns on while camera waits for USB remote to sync
 113 
 114     #define CAM_SD_OVER_IN_AF                   1
 115     #define CAM_SD_OVER_IN_MF                   1
 116 
 117     #define CAM_ADJUSTABLE_ALT_BUTTON           1
 118     #define CAM_ALT_BUTTON_NAMES                { "Playback", "Video" }
 119     #define CAM_ALT_BUTTON_OPTIONS              { KEY_PLAYBACK, KEY_VIDEO }
 120     #define CAM_DISP_BUTTON_NAME                "Video"
 121     #define SHORTCUT_TOGGLE_RAW                 KEY_VIDEO
 122 
 123     #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works
 124 
 125 
 126 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */