root/platform/ixus255_elph330hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - ixus255_elph330hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the elph130 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     6
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1 // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47               1 // Defined for cameras with DryOS version R47 or higher
  27 
  28     #define CAM_RAW_ROWPIX                  4176 // Found @0xff1f7824
  29     #define CAM_RAW_ROWS                    3062 // Found @0xff1f7830
  30 
  31     #define CAM_JPEG_WIDTH                  4000
  32     #define CAM_JPEG_HEIGHT                 3000
  33 
  34     // defined to pixels containing any data
  35     #define CAM_ACTIVE_AREA_X1              96
  36     #define CAM_ACTIVE_AREA_Y1              18
  37     #define CAM_ACTIVE_AREA_X2              4168
  38     #define CAM_ACTIVE_AREA_Y2              3062
  39 
  40     #undef  CAM_UNCACHED_BIT
  41     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff03a200
  42 
  43     #undef  CAM_SENSOR_BITS_PER_PIXEL
  44     #define CAM_SENSOR_BITS_PER_PIXEL       12
  45 
  46     #define CAM_DNG_LENS_INFO               { 43,10, 430,10, 30,10, 69,10 } // See comments in camera.h
  47 
  48     // verified
  49     #define cam_CFAPattern                  0x02010100 // Red Green Green Blue
  50 
  51     // Generated using X-Rite ColorChecker Camera Calibration software, v1.0.2
  52     // with photos taken of a GretagMacbeth ColorChecker
  53     // Matricies extracted with dcpTool: http://dcptool.sourceforge.net/
  54     #define cam_CalibrationIlluminant1      17      // Standard Light A
  55     #define cam_CalibrationIlluminant2      21      // D65
  56     #define CAM_COLORMATRIX1 \
  57        798, 1000,   -562, 1000,   1580, 1000, \
  58        158, 1000,     66, 1000,   1375, 1000, \
  59        528, 1000,  -1063, 1000,  12790, 1000
  60     #define CAM_COLORMATRIX2 \
  61      15311, 1000,  -6044, 1000,  -1478, 1000, \
  62       -435, 1000,   9280, 1000,   1381, 1000, \
  63        172, 1000,   1362, 1000,   3978, 1000
  64 
  65     // no separate erase button
  66     #undef  CAM_HAS_ERASE_BUTTON
  67     #undef  CAM_HAS_DISP_BUTTON
  68     #define CAM_HAS_VIDEO_BUTTON            1
  69     #undef  CAM_USE_ZOOM_FOR_MF
  70     #undef  CAM_HAS_IRIS_DIAPHRAGM
  71     #define CAM_HAS_ND_FILTER               1
  72 
  73     // long shutter is actually user TV, may work ?
  74     #undef  CAM_HAS_USER_TV_MODES
  75 
  76     #undef  CAM_VIDEO_CONTROL
  77 // not working
  78     #undef  CAM_CHDK_HAS_EXT_VIDEO_MENU
  79 //    #define CAM_VIDEO_QUALITY_ONLY          1
  80 //    #define CAM_CHDK_HAS_EXT_VIDEO_MENU     1
  81 
  82     // TODO
  83 //    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
  84 
  85     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO  // unlocked in canon firmware by default
  86 
  87     #undef  CAM_HAS_MANUAL_FOCUS
  88 
  89     // MakeDirectory_Fut not found, using mkdir
  90     #define MKDIR_RETURN_ONE_ON_SUCCESS
  91 
  92     //aspect correction
  93     #undef  CAM_USES_ASPECT_CORRECTION
  94     #define CAM_USES_ASPECT_CORRECTION      1       //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
  95     #undef CAM_BITMAP_WIDTH
  96     #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes
  97     #undef  CAM_BITMAP_HEIGHT
  98     #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows
  99 
 100     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1   // Draw pixels on active bitmap buffer only.
 101 
 102     #define CAM_LOAD_CUSTOM_COLORS          1   // Enable loading CHDK colors into the camera palette memory/hardware
 103     // doesn't seem to conflict badly with anything
 104 
 105     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
 106                                                 // Used to enabled bracketing in custom timer, required on many recent cameras
 107                                                 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
 108 
 109     #define CAM_ADJUSTABLE_ALT_BUTTON       1
 110 
 111     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Video" }
 112     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_VIDEO }
 113 
 114     #undef  CAM_USB_EVENTID
 115     #define CAM_USB_EVENTID                         0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
 116 
 117     #undef  CAMERA_MIN_DIST
 118     #define CAMERA_MIN_DIST                 47      // Override min subject distance in macro mode
 119     #undef  CAMERA_MAX_DIST
 120     #define CAMERA_MAX_DIST                 564972       // Define max distance that can be set in _MoveFocusLensToDistance (allow override for superzooms - SX30/SX40)
 121 
 122     #define CAM_SD_OVER_IN_AFL              1
 123     #define CAM_SD_OVER_IN_MF               1
 124 
 125     // Seems to work
 126     #define CAM_DATE_FOLDER_NAMING          0x80
 127 
 128     #define PARAM_CAMERA_NAME               3       // parameter number for GetParameterData
 129 
 130     #define CAM_FILE_COUNTER_IS_VAR         1       // file counter is variable file_counter_var in stubs, not a param
 131 
 132     #define CAM_HAS_FILEWRITETASK_HOOK      1 // FileWriteTask hook is available (local file write can be prevented)
 133     #define CAM_FILEWRITETASK_SEEKS         1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
 134 
 135 //    only non-AF led available
 136     #define REMOTE_SYNC_STATUS_LED          0xC022C020  // specifies an LED that turns on while camera waits for USB remote to sync
 137 
 138     #undef  CAM_AF_LED
 139     #define CAM_AF_LED                      1
 140 
 141     #define CAM_DISABLE_RAW_IN_HANDHELD_NIGHT_SCN 1     // For cameras with 'HandHeld Night Scene' mode that does not work with raw define this
 142     #define CAM_DISABLE_RAW_IN_HQ_BURST                 // For cameras with 'HQ Burst' mode that does not work with raw define this
 143 
 144     #define CAM_HAS_CMOS                    1          // Camera has CMOS sensor
 145 
 146     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1       // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
 147     #define CAM_USE_ALT_SET_ZOOM_POINT      1       // Define to use the alternate code in lens_set_zoom_point()
 148     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1      // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 149     #define CAM_NEED_SET_ZOOM_DELAY          150    // Define to add a delay after setting the zoom position
 150 
 151 //----------------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */