1 // Camera - A810 - platform_camera.h
2
3 // This file contains the various settings values specific to the A810 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 5
25
26 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
27 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
28
29 #define CAM_RAW_ROWPIX 4704 // Found @0xff92def4 a810
30 #define CAM_RAW_ROWS 3504 // Found @0xff92df00 a810
31
32 #undef CAM_UNCACHED_BIT
33 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff832e74 a810
34
35 #define CAM_JPEG_WIDTH 4608
36 #define CAM_JPEG_HEIGHT 3456
37 #define CAM_ACTIVE_AREA_X1 16
38 #define CAM_ACTIVE_AREA_Y1 26
39 #define CAM_ACTIVE_AREA_X2 4640
40 #define CAM_ACTIVE_AREA_Y2 3486
41
42 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h a810
43
44 #undef CAM_SENSOR_BITS_PER_PIXEL
45 #define CAM_SENSOR_BITS_PER_PIXEL 12
46
47 #define cam_CFAPattern 0x01000201 // [Green Blue Red Green]
48
49 #define CAM_COLORMATRIX1 \
50 827547, 1000000, -290458, 1000000, -126086, 1000000, \
51 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
52 5181, 1000000, 48183, 1000000, 245014, 1000000
53
54 #define cam_CalibrationIlluminant1 1 // Daylight
55
56 #define CAM_ZEBRA_NOBUF 1
57
58 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
59
60 #define CAM_HAS_ND_FILTER 1
61
62 #define CAM_HAS_VIDEO_BUTTON 1
63
64 #undef CAM_VIDEO_CONTROL
65 #define CAM_VIDEO_QUALITY_ONLY 1
66 #define CAM_HAS_MOVIE_DIGEST_MODE 1 //Camera doesn't actually have MOVIE_DIGEST_MOVIE, but this is required by is_video_recording.
67 //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
68 #define CAM_CAN_MUTE_MICROPHONE 1
69
70 #define CAM_DATE_FOLDER_NAMING 0x400
71
72 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
73
74 #undef CAM_HAS_IRIS_DIAPHRAGM
75
76 #undef CAM_HAS_ERASE_BUTTON
77
78 #undef CAM_HAS_IS // Camera does not have an image stabilizer
79
80 #undef CAM_HAS_MANUAL_FOCUS
81
82 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
83
84 #undef CAM_USES_ASPECT_CORRECTION
85 #define CAM_USES_ASPECT_CORRECTION 1
86 #undef CAM_BITMAP_WIDTH
87 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
88
89 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
90 #define CAM_ALT_BUTTON_NAMES { "Playback", "Help", }
91 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_HELP }
92 #undef CAM_HAS_DISP_BUTTON
93 #define CAM_DISP_BUTTON_NAME "Video"
94 #define SHORTCUT_TOGGLE_RAW KEY_VIDEO
95
96 #define CAM_HAS_FILEWRITETASK_HOOK 1
97 #define CAM_FILEWRITETASK_SEEKS 1
98
99 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
100
101 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
102 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
103
104 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
105 #define CAM_QUALITY_OVERRIDE 1
106
107 #undef CAM_USB_EVENTID
108 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
109 #define CAM_MISSING_RAND 1 // srand()/rand() functions not found in firmware. If defined, CHDK use functions implemented in C
110 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
111
112 // #define REMOTE_SYNC_STATUS_LED 0xC0220130 // TODO specifies an LED that turns on while camera waits for USB remote to sync
113
114 #undef CAM_AF_LED
115 #define CAM_AF_LED 1 // Index of AF led in camera_set_led function
116
117 #define CAM_SD_OVER_IN_AF 1
118 #define CAM_SD_OVER_IN_MF 1
119
120 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
121
122 //--------------------------------------------------