root/platform/a1200/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - A1200 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the A1200 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                       1
  24     #define CAM_PROPSET                     4
  25 
  26     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  27     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  28 
  29     #define CAM_RAW_ROWPIX                  4104    // Found @0xff937e98
  30     #define CAM_RAW_ROWS                    3048    // Found @0xff937ea4
  31 
  32     #undef  CAM_UNCACHED_BIT
  33     #define CAM_UNCACHED_BIT                0x40000000  // Found @0xff83a2e0
  34 
  35     #define CAM_JPEG_WIDTH                  4000
  36     #define CAM_JPEG_HEIGHT                 3000
  37     #define CAM_ACTIVE_AREA_X1              0
  38     #define CAM_ACTIVE_AREA_Y1              10
  39     #define CAM_ACTIVE_AREA_X2              4072
  40     #define CAM_ACTIVE_AREA_Y2              3040
  41 
  42     #define CAM_DNG_LENS_INFO   { 50,10, 200,10, 28,10, 59,10 } // See comments in camera.h
  43 
  44     #undef  CAM_SENSOR_BITS_PER_PIXEL
  45     #define CAM_SENSOR_BITS_PER_PIXEL       12
  46 
  47     #define cam_CFAPattern                  0x01000201  // Green  Blue  Red  Green
  48 //  #define cam_CFAPattern                  0x02010100  // Red  Green  Green  Blue
  49 
  50     #define CAM_COLORMATRIX1                             \
  51     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  52     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  53       5181, 1000000,   48183, 1000000,  245014, 1000000
  54 
  55     #define cam_CalibrationIlluminant1      1       // Daylight
  56 
  57     #define CAM_ZEBRA_NOBUF                 1
  58 
  59     #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData
  60 
  61     #define CAM_HAS_ND_FILTER               1
  62 
  63     #define CAM_VIDEO_QUALITY_ONLY          1
  64 
  65     #define CAM_DATE_FOLDER_NAMING          0x400
  66 
  67     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
  68 
  69     #undef  CAM_HAS_IRIS_DIAPHRAGM
  70 
  71     #undef  CAM_HAS_ERASE_BUTTON
  72 
  73     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  74 
  75     #undef  CAM_HAS_MANUAL_FOCUS
  76 
  77     #undef  CAM_VIDEO_CONTROL
  78 
  79     #define CAM_CHDK_HAS_EXT_VIDEO_TIME     1
  80 
  81     #define CAM_CAN_MUTE_MICROPHONE         1
  82 
  83     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1   // For cameras with 'low light' mode that does now work with raw define this
  84 
  85     #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
  86 
  87     #undef  CAM_USES_ASPECT_CORRECTION
  88     #define CAM_USES_ASPECT_CORRECTION      1
  89     #undef CAM_BITMAP_WIDTH
  90     #define CAM_BITMAP_WIDTH                720   // Actual width of bitmap screen in bytes
  91 
  92     #define  CAM_ADJUSTABLE_ALT_BUTTON      1    // ALT-button can be set from menu
  93     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Face", "Disp" }
  94     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_FACE, KEY_DISPLAY }
  95 
  96     #define CAM_NEED_SET_ZOOM_DELAY          300  // Define to add a delay after setting the zoom position
  97     #define CAM_USE_ALT_SET_ZOOM_POINT       1    // Define to use the alternate code in lens_set_zoom_point()
  98     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1    // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  99     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS  1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
 100 
 101     #undef  CAM_AF_LED                            // AF Lamp index for camera_set_led()
 102     #define CAM_AF_LED                       2    //
 103 
 104     #define CAM_REMOTE_USES_PRECISION_SYNC   1    // USB remote precision sync patch works with this camera
 105     #define GPIO_VSYNC_CURRENT               0xC0F070C8  // vsync current status register used by USB remote precision sync
 106 
 107     #define CAM_HAS_FILEWRITETASK_HOOK       1
 108 
 109     #define CAM_SD_OVER_IN_AFL               1
 110     #define CAM_SD_OVER_IN_MF                1
 111     
 112     #define CAM_HAS_MOVIE_DIGEST_MODE        1
 113     
 114     #define CAM_IS_VID_REC_WORKS             1   // is_video_recording() function works    
 115 
 116 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */