1 // Camera - a480 - platform_camera.h
2
3 // This file contains the various settings values specific to the a480 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 3720
27 #define CAM_RAW_ROWS 2772
28
29 #undef CAM_USE_ZOOM_FOR_MF
30 #undef CAM_HAS_ERASE_BUTTON // Camera does not have Erase button
31 #undef CAM_HAS_DISP_BUTTON // Camera does not have DISP button
32 #undef CAM_HAS_IRIS_DIAPHRAGM
33 #define CAM_HAS_ND_FILTER 1
34 #undef CAM_HAS_MANUAL_FOCUS
35 #undef CAM_HAS_USER_TV_MODES
36 #undef CAM_HAS_IS
37 #define CAM_MULTIPART 1
38 #undef CAM_VIDEO_CONTROL
39 #define CAM_REAR_CURTAIN 1
40 #undef DEFAULT_RAW_EXT
41 #define DEFAULT_RAW_EXT 2 // use .CR2
42 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
43 #define CAM_CAN_MUTE_MICROPHONE 1
44 #define CAM_EV_IN_VIDEO 1
45
46 #define CAM_DNG_LENS_INFO { 66,10, 216,10, 30,10, 58,10 } // See comments in camera.h
47 // pattern
48 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
49 // color
50
51 #define CAM_COLORMATRIX1 \
52 827547, 1000000, -290458, 1000000, -126086, 1000000, \
53 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
54 5181, 1000000, 48183, 1000000, 245014, 1000000
55
56 #define cam_CalibrationIlluminant1 1 // Daylight
57 // cropping
58 #define CAM_JPEG_WIDTH 3648
59 #define CAM_JPEG_HEIGHT 2736
60 #define CAM_ACTIVE_AREA_X1 6
61 #define CAM_ACTIVE_AREA_Y1 12
62 #define CAM_ACTIVE_AREA_X2 3690
63 #define CAM_ACTIVE_AREA_Y2 2772
64
65 // camera name
66 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
67 #undef CAM_SENSOR_BITS_PER_PIXEL
68 #define CAM_SENSOR_BITS_PER_PIXEL 12
69
70 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
71 // Used to enabled bracketing in custom timer, required on many recent cameras
72 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
73
74 #define CAM_HAS_FILEWRITETASK_HOOK 1
75
76 #define REMOTE_SYNC_STATUS_LED 0xC0220088 // specifies an LED that turns on while camera waits for USB remote to sync
77
78 #define CAM_SD_OVER_IN_AF 1
79 #define CAM_SD_OVER_IN_AFL 1
80 #define CAM_SD_OVER_IN_MF 1
81
82 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
83
84 //--------------------------------------------------
85
86 #undef CAM_DEFAULT_MENU_CURSOR_BG
87 #undef CAM_DEFAULT_MENU_CURSOR_FG
88 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
89 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors
90
91 #define CAM_QUALITY_OVERRIDE 1 // https://chdk.setepontos.com/index.php?topic=13342